• Flow range 3 to 60 Tons/Hour
• Max working pressure up to 4MPa
• Temperature range -50 to +200℃
• 316L stainless steel tubes
• Mass flow accuracy ±0.15% of flowrate ± Error of Zero (At zero instability)
• Temperature accuracy ±1℃
• Density accuracy ±0.002g/cm³
• Nine-wire cabling for remote type

Application Image

• Max working pressure up to 4MPa
• Temperature range -50 to +200℃
• 316L stainless steel tubes
• Mass flow accuracy ±0.15% of flowrate ± Error of Zero (At zero instability)
• Temperature accuracy ±1℃
• Density accuracy: ±0.002g/cm³
• Four-wire cabling for remote type
• Intelligent core processor

• Power supply 240VAC±10% or 24VDC±10%
• Ambient temperature: -10 to +50℃
• Chinese & English Language
• 4-20mA current output & 0-10KHz scaled pulse output
• Two contact inputs are external powered (TTL signal): The ground terminal of each contact input is the ground of 24VDC of the convertor
• The contact output is the collector of the transistor open with galvanic isolation
• LCD display Temperature, Density, Mass flowrate and Mass flow
• Display accuracy ±0.05% (Fs) & ±0.01% (Fs)
• Zeroing, Reset total flow, Total flow pause, and Zeroing warn

• Model                  LK-X, LK-XXX and LK-XXXX
• Measured parameter        Mass flow, Density, Temperature and Volume flow
• Fluid                                  liquids, gases or slurries
• Sensor                              LK015 to LK150
• Normal Diameter                DN15, DN25, DN32, DN40, DN50, DN80, DN100 &  DN150
• Measurement range           0-3, 0-7, 0-21, 0-38, 0-60, 0-180, 0-300 & 0-600 (Tons/Hour)
• Mass accuracy                   ±0.15% of flowrate ± EO
• Temperature accuracy    ±1℃
• Density accuracy                ±0.002g/cm³
• Piping Connection        Flanged
• Max working pressure       4.0MPa
• Working temperature         -50℃ to +200℃
• Housing:                           304 stainless steel
• Housing protection            IP66
• Measuring tube                  316L stainless steel
• Converter installation         Wall mount, Rack mount & Field mount
• Current output                   4-20mA
• Frequency output                     0-10KHz
• Power supply                     240VAC±10% or 24VDC±10%
• Explosion proof                 ExibⅡBT4    ExdⅡBT4
• Flowmeter installation        Remote or Integral
• Communication protocol    RS485

Flowrate & Sensor size