Transmitter

Power Supply

Internal lead acid gel cell battery provides 16 hours running. AC charging: (std.) 115/230VAC 50/60Hz ±10%;

(opt.) 100/200 VAC 50/60Hz; (opt.) 12 VDC

Velocity

0.15 to 6.08m/s

Display

2 line x 20 character alphanumeric LCD back lit, digit height 5mm, 6 digit flowrate, 6 digit totalizer (resettable)

Units

Rate

Totalizer

User Configured (English & Metric); Rate and Velocity Display:

FPS, GPM, MGD, MPS, LPM, M³/Hour

Gallons, Liters, M³

Output

All outputs are isolated from earth and system grounds. 4-20mA: 600 ohm max,

Indicators

Power, signal Strength, Flow Analyzer, Fault, Over-range,

Read, Low battery, Charge

Ambient condition

-30 to 70℃, 0-95% relative humidity, non-condensing

Enclosure

NEMA 4X (IP65) ABS with hardware:

279W*432L*203D (mm)

Non-linearity (Accuracy)

±2.0% of full scale

Sensitivity

% of full scale

Repeatability

±0.4% of full scale

Responding time

5-50 seconds, user configured, to 90% of value, 

Step change in flow

Explosion proof

Exd II BT6 certified

Security

Keypad lockout, access code enable

Other functions

Automatic record incident and functions of managing of flow

Remember the state of the flowmeter diagnosis

Transducer

Liquids types

25ppm of 30 micron size* suspended solids or entrained gases (air)

*Less than this minimum will be require transducer mount downstream of a 90 degree elbow

Suited liquid temperature

Std. temp. transducer (-40 to +121℃)

Opt. temp. transducer (-40 to +204℃)

Transducer to transmitter cable

Standard: 6m, retractable cord

Pipe size

Std: 25 to 3050mm Pipe I.D.

Opt.: 6 to 25mm, small pipe transducer

Housing

(Std.) Aluminum Ulterm^TM w/epoxy encapsulation

(High temp.) Vesped ^TM Aluminum