|
|
DMTFB Clamp-on Series Ultrasonic Flowmeter
- The DMTFB Ultrasonic flowmeters provide abundant capabilities for accurate liquid flow measurement from outside of a pipeline
- It utilizes state-of-art technologies on ultrasonic transmission / receiving digital processing and transit-time measurement
- The proprietary signal quality tracking and self-adapting technologies allow system to adapt to different pipe materials automatically
- Clamp-on design makes the transducer installation easy and no special skills or tools required
Specification:
|
Transmitter
|
Power Supply
|
(Std) 10-28 VDC@ 2.5VA max, 115/230VAC 50/60Hz ±15%@ 5VA max, Solar energy 12VDC
|
|
Velocity
|
-40 to 40 ft/s (-12 to +12m/s), bi-directional
|
|
Display
|
4 line x l6 English letters LCD back lit, can display total flow, flow rate, velocity and meter running status etc.
|
|
Units
Rate
Totalizer
|
User Configured (English and Metric)
Rate and Velocity Display;
(FWD, NET, REV or BATCH) gallons, ft3, barrels, Ibs, liters, m3, kg
|
|
Output
|
4-20mA, OCT Pulse, Relay, RS232C or RS485, options: up to 8GB Data logger, Hart +(4-20mA), Modbus Protocol etc.
|
|
Accuracy
|
±1.00/0 of reading at rates >0.5 m/s
|
|
±0.005 m/s of reading at rates<0.5 m/s
|
|
Sensitivity
|
Flowrate: 0.001ft/s (0.0003m/s)
|
|
Repeatability
|
0.2% of reading
|
|
Dimensions and Weight
|
Std: 241*193*76.5, Weight: <2.5kg Exp: 255*220*110, Weight: <5.0kg
|
|
Security
|
Keypad lockout, access code enable
|
|
Transducer
|
Liquid Types
Supported
|
Virtually most any liquid containing less than 2% total suspended solids (TSS) or aeration
|
|
Suited Liquid Temperature
|
Std. Temp. Transducer: -40-121℃High Temp. Transducer: -40-250℃
|
|
Cable Length
|
Std: 20 feet (6m); Opt: Max: 990feet (300m)
|
|
Pipe Size
|
S transducer: 12-50mm
Std M transducer: 40-1000mm
L transducer: 1000-4570mm
K-mode round transducer: 12-50mm
|
|
Dimensions and weight
|
S: Size:42*25*25; weight: <0.2kg M: Size:60*43*43; weight: <0.5kg L: Size: 80*53*53; weight: <1.0kg
|
|
Accessories
|
Couplant
|
Dow Corning 111 or 732 (112 for high temp.)
|
|
Data Logger
|
Optional 512M to 8GB SD card
|
|
S-S Belt
|
According to the pipe line size
|
Application:
- Water supply and drainage water, including hot water, sewage (with less than 5% suspended solids) and sea water
- Process liquids, including liquors, beverage, olive oil and milk
- Oil, including lubricating oil, gasoline, kerosene and diesel oil
- Metallurgy, laboratory, food and medicine
- On-the-spot check-up, pipeline leak detection & judgment
Features:
- Advanced Digital Signal Processing (DSP) technology & MultiBeam transducer technology
- Digital Cross-correlation (DCC) technology
- Non-invasive flow system allowing solids to pass through the pipe with no effect on meter
- No Y-strainers or filtering devices needed
- No-contacting sensor design making no fouling and free maintenance
- Sensors suitable for different pipe materials with wide pipe diameters
- Easy and cost-saving installation by clamping transducers on the outside of existing piping systems
- User-friendly menu selections making DMTFB easy operations
- User-configurable in English, metric and other universal engineering units
- Event data logger available in searching the event of totalizer
- Parallel operation of positive, negative and net flow totalizers available
- The flow rate, or total pulse output and frequency output available via open collector
|